Double Shaft Mixer

Short Description:

This mixer motor is 75/90/110KW, equipped with a pneumatic clutch, double shaft mixing output by a special medium-hard tooth surface gearbox with variable speed.


Product Detail

Product Tags

Product Description

The two stirring shafts are driven by a coupling, and a stirring knife is installed on the stirring shaft. When working, the two stirring shafts both rotate inwards. When the raw material enters the stirring tank, it is cut by the stirring knife installed on the stirring shaft, squeezed, stirred, transported, make the raw materials mixing and curing.

Basic Information

Product Attribute

Items Details Description

Brand BricMaker
Function Raw materials mixing
Raw Material Clay, Soil, Mud, Shale, Coal, Ash, Gangue
Working Principle Watering and mixing
Warranty 1 Years
After Service Life Long Service

Technical Parameter

Parameters

Model

Unit

SJ400X46

SJ400X55

Production Capacity

m3/h

50-75

75-150

Bin Length

mm

4000

4000

Shafts Distance

mm

460

550

Mixing Revolutions

r.p.min.

30

30

Mixing Diameter

mm

604

800

Total Power

kw

75/90

110

Overall Dimensions

mm

6250×1570×1230

7620×1800×1340

Total Weight

kg

12,000

16,000

Operation and Maintenance

a) Always pay attention to and check the air pressure of the air pump, check the air leakage of the trachea and electrical components.

b) Always pay attention to and check the pneumatic clutch, timely adjust the friction plate clearance, neither too loose nor too tight phenomenon.

c) Check the reducer regularly to ensure enough oil, check the bearing for heating and abnormal noise.

d) After using a certain stage of the mixing knife, it should be replaced in time according to the wear condition, and the gap between the general mixing knife and the mixing tank is not more than 20mm.

e) Should establish large, medium and small maintenance system, regular maintenance and repair. One to two monthly maintenance. Use the winter season to conduct medium or large maintenance.

f) To ensure the safety of production, it is forbidden to overhaul under the condition of motor rotation, to set up guardrail around the machine, and to prohibit the entry of personnel when the machine is working.


  • Previous:
  • Next:

  • Products categories