Box Feeder
This machine is suitable for building materials industries such as mines, chemicals, bricks, tiles etc. It takes loose materials from storage bins or yards and transport them to downstream equipment.
Box feeder runs smoothly, has reliable performance, and easily to operate and maintain.
|
Product Attribute |
Items Details Description |
|
| Brand | BricMaker | |
| Function | Raw materials feeding | |
| Raw Material | Clay, Soil, Mud, Shale, Coal, Ash, Gangue | |
| Working Principle | Transferring raw materials | |
| Warranty | 1 Years | |
| After Service | Life Long Service | |
|
Parameters |
Model |
Unit |
XGD 100 |
XGD 120 |
| Production Capacity |
m³/h |
35-50 |
40-80 |
|
| Feeding Size |
mm |
≤ 200 |
≤ 200 |
|
| Belt Width |
mm |
1000 |
1200 |
|
| Belt Speed |
m/min |
10 |
10 |
|
| Box Volume |
m³ |
3.5 |
4.2 |
|
| Total Power |
kw |
7.5+3 |
11+3 |
|
| Overall Dimensions |
mm |
5600×1990×1200 |
5600×2200×1200 |
|
| Total Weight |
kg |
3,300 |
3,500 |
The machine has large volume and general steel properties, so in order to prevent deformation, the lifting must be carried evenly at four points, and the longitudinal two stress points must cross the two channel steel columns (the transverse two stress points are the two sides of the box).
Gear oil should be added into reducer box, lithium-based butter into gear and the chain before use. The lower end of the box shall be fitted with rubber and the rubber shall be attached to the tape. Apply the wire rod to adjust the deviation of the tape. Bearing should always add butter (usually once every three months).
Pull rods are generally made of A3 steel, do not use hard and brittle material to avoid breaking off, for it may fall into the next process to damage the machine. The rods shall be covered with iron fences to ensure the safety of personnel.
